Cutback MC 250 containing minimum 67% Bitumen, is commonly used as a Prime Coating and Maintenance Mixing. It is homogeneous and will not foam (as observed visually) when heated to application temperature.
Priming of all non-bituminous road buses, provision of temporary surfaces(deviations).
From 0.6 litre per m² to 1.2 litre per m²
Steel Drum / 1Mt IBC Tank
|1||Kinematic Viscosity at 60?C, cst||ASTM D2170||250||500|
|2||Flash Point||ASTM D3143||66||–|
|3||Water content, % volume||ASTM D95||–||0.2|
|4||Distillation, % by volume of total distillate to 360?C||ASTM D402||–||–|
|i) to 225?C||ASTM D402||–||10|
|ii) to 260?C||ASTM D402||15||55|
|iii) to 316?C||ASTM D402||60||87|
|5||Residue from distillation to 360?C||ASTM D402||67||–|
|6||Penetration, 100g, 5 sec, 25?C||ASTM D5||120||250|
|7||Ductility, 5sec/min. 25?C||ASTM D113||100||–|
|8||Solubility to Trichloroethylene, %||ASTM D2042||99||–|